dryiceClassified.com
A division of dryiceInfo.com

Home

New Equipment

used Equipment

Add your company equipment here:
Marketing

Other Informative sites:

dryiceInfo.com dryiceDirectory.com DryIceBlastCleaning.com Blast Cleaning Directory

The Web's Leading Source of Used Dry Ice Equipment and Machinery

Equipment and Machinery Now Available

Exclusive Listings Ongoing Listings

Cold Jet i3 Microclean and Cold Jet Ice Press - Butler, PA, USA
Cold Jet Aero 40 - Snellville, Georgia, USA
Cold Jet Aero 75DX - Midland, Texas, USA
Kδrcher Dry Ice Blaster  IB 15/80 Vancouver, BC, Canada
Cold Jet P750 Dry Ice Production Equipment - plus transformer and more if interested - St. Louis, MO, USA
Cold Jet Aero 40HP Dry Ice Blaster with After Cooler - (2) sets  - St. Louis, MO, USA
Cold Jet i3 Microclean - St. Louis, MO, USA
Cold Jet i3 Ice Press Block Production Unit - St. Louis, MO, USA

Cold Jet C-100 - East Jacksonville, TX, USA
Cold Jet Aero 40HP SOLD and Sullair Air Compressor (REDUCED) - Las Vegas, NV, USA
Complete Blasting Service Equipment - near Philadelphia, PA, USA
Cold Jet P325 Pellitizer capable of producing pellets or nuggets - located Alajuela, Costa Rica
Cold Jet Dry Ice Press
- located Alajuela, Costa Rica
i3MicroClean with 6 hours of use
- located Alajuela, Costa Rica
(2) Aero 80DX cold jet machines - located Alajuela, Costa Rica

ASCO Automatic Dry Ice Machine BP407-CNC
- Jebel Ali Free Zone, Dubai, United Arab Emirates
6000 Liters Carbon Dioxide Transport Tank
- Jebel Ali Free Zone, Dubai, United Arab Emirates
COLD JET SDI SELECT 60, After Cooler, and more
- Fort Benton, MT, USA
Cold Jet AeRO 75-DX with After Cooler -
East Wenatchee, WA, USA
Cold Jet i³ MicroClean Dry Ice Blasting Machine 
- Carlsbad, California, USA (Unit is located in Bangkok, Thailand)
Nu Ice Age Commando 55 Dry Ice Blasting Machine
- Wonder Lake, Illinois, USA
Cold Jet Cryogenic RDS 500 CUB dry ice blaster and AIR DRYER -
San Francisco, California, USA
Blaster Microblast MB/AL-BIK
- Ballyfrory, Duncormick, Ireland
Alpheus 320 Dry Ice Machine Pelletizer
- Brookhaven, Mississippi , USA
TOMCO2 Dry Ice Blasting Machines
- Glastonbury, Connecticut, USA
Cold Jet Aero 40HP with After Cooler
- Barto, Pennsylvania, USA SOLD
Farrow 250 Max System
- Barto, Pennsylvania, USA Still available
Cold Jet Aero 80-DX Dry Ice Blaster
- Cedar Falls, Iowa, USA
Alpheus Clean Blast rice pelletizer dry ice maker
- Vancouver, Canada
ColdJet Block Master Dry Ice Maker
- Vancouver, Canada
Cold Jet Aero 30 - Albany, Oregon, USA

SDI-5 Dry Ice Blasting Machine - Milton, Ontario, Canada
Triventek TRIBLAST 2 Dry Ice Blaster- London, Ontario, Canada
MES Services: Phoenix PHX -150 Dry Ice Blasting Machine - Michigan, USA
Alpheus SDI-5 Dry Ice Blasting Machine - Warren, Michigan, USA

 


 

 
Past SOLD Machines
Cold Jet Aero 75 with After Cooler - Grosse Tete, Louisiana, USA SOLD
Triventek TRIBLAST 2 Dry Ice Blaster - London, Ontario, Canada SOLD
Cold Jet Aero 30 with After Cooler - Parker, Colorado, USA SOLD
Coldjet CO2 MiniBlaster Alpheus SDI-5 - London Ontario, Canada (machine is located in a USA warehouse) SOLD
Cold Jet Aero 40HP with After Cooler - Ft. Meyers, FL, USA SOLD
Cold Jet VHS 2000 - Creston, British Columbia, Canada SOLD
Ice Tech KG 30 Blasting System - Phoenix, Arizona, USA SOLD
Cold Jet Aero 40 - Norman , Okalahoma, USA SOLD
IceTech KG30 Pro - Calgary, Alberta, Canada SOLD
Karcher IB 15/80 Dry Ice Blaster - Des Moines, Iowa, USA SOLD
Cold Jet Aero 40 HP with After Cooler - Crestwood, Kentucky, USA SOLD
COLDJET AeRO 30 Dry Ice Blasting Machine and After Cooler Colorado, USA SOLD
Dry Ice Blasting, Soda Blasting, Flood and Fire Restoration Equipment for sale -Toronto, Canada SOLD
Cold Jet Aero 40 - Opelousas, Louisiana, USA SOLD
Cold Jet Aero 40HP with After Cooler - Barto, Pennsylvania, USA SOLD
SDI-5 Dry Ice Blasting Machine - London Ontario, Canada (machine is located in a USA warehouse) SOLD
Cold Jet Aero 75-DX - Lincoln, NE, USA SOLD
Littmann LT-280 Double Action Dry Ice Blaster
- London, Ontario, Canada
SOLD
Cold Jet 250-FP Dry Ice Blaster - Vaughan, Ontario, Canada SOLD
Littmann LT-50 Shop Blaster - London, Ontario, Canada SOLD
Cold Jet Aero 40 LP with After Cooler - North Carolina, USA SOLD
Wittemann Dry Ice Extruder - California, USA SOLD
Everything for a dry ice blasting service - Petoskey, Michigan SOLD
Dry Ice Pellet Machine #1 -  from Holmes Equipment - Fort Worth, Texas, USA SOLD
Dry Ice Pellet Machine #2 -  from Holmes Equipment - Fort Worth, Texas, USA
SOLD
Dry Ice Pellet Machine - LD Nugget System from Liquid Carbonic Corp.
- Fort Worth, Texas, USA
SOLD
Aero - 75 - DX - Lordstown, OH, USA
SOLD
Aero - 80 - DX - Lordstown, OH, USA
SOLD
Aero - 75 - DX - Lordstown, OH, USA
SOLD
Dry Ice Blasting Trailer
- Lordstown, OH, USA
SOLD
 
Cold Jet Aero 40LP with After Cooler - Ottawa, IL, USA  SOLD
Cold Jet 2000 Dry Ice Blaster - Ponoka Alberta, Canada SOLD

Cold Jet Aero 80 DX with After Cooler - Kentucky, USA SOLD
Cold Jet Aero 40 with After Cooler - Ohio, USA SOLD

Kδrcher IB 7/40 Advanced - Esbjerg, Denmark SOLD
Cold Jet Aero 30 with After Cooler and many accessories - Kansas, USA SOLD
Cold Jet Aero 75 DX, Microclean 13, Ice Press, & After Cooler (Abu Dhabi, United Arab Emirates) SOLD
Cold Jet Aero 75 Dry Ice Blasting Machine - Louisiana, USA - removed from market - decided to keep using it.
Cold Jet Aero 40Dry Ice Blasting Machine - Minnesota, USA SOLD
Repossessed Cold Jet Aero 75 - Atlanta, Georgia, USA SOLD
Cold Jet RDS 250-FP SOLD
Repossessed Cold Jet Aero 30 - Atlanta, Georgia, USA SOLD
IceTech KG 30 Dry Ice Blasting Machine and SULLAIR Rotary Screw Compressor - SOLD
Karcher IB 15/80 Dry Ice Blasting Machine SOLD
Triventek Triblast-2 - Calgary, Canada SOLD
Commando 55 Dry Ice Blaster
 SOLD
Cold Jet Aero 75 DX Dry Ice Blasting Machine SOLD
Cold Jet Aero 40HP Dry Ice Blasting Machine with After Cooler and extra accessories SOLD
Cold Jet Aero 40 Dry Ice Blasting Machine SOLD
Cold Jet Aero 40 Dry Ice Blaster & Extra Mern Nozzle
SOLD
Cold Jet Aero 40 LP with After Cooler 400P SOLD
Cold Jet Aero 80-DX Dry Ice Blaster with After Cooler SOLD
Cold Jet Aero C100  (3 Machines
In Belgium) SOLD
AeRO 80 Dry Ice Blasting Machine SOLD
AeRO 40 Cold Jet Dry Ice Blasting Machine SOLD
Cold Jet Aero 75 Dry Ice Blasting Machine SOLD
PPAH-1500 Pellet Ice Maker
SOLD
SDI-5 Dry Ice Blasting Machine SOLD
Baldwin Dry Ice Press with vapor recovery system SOLD

  
Currency conversion available:
Two Cold Jet machines available
COLD JET i3 MICROCLEAN
Cold Jet Microclean i3 s/n 437. The machine has 65 hours use on it. It was bought new in 2012.
The nozzle is a 5E-0241-REM
 
Asking:
$19,000.00 USD
COLD JET ICE PRESS i3
Cold Jet Ice Press i3 s/n 1114. Bought new in 2012 
Asking: $9500.00 USD

Package deal for both.
Located in my warehouse in Butler, Pa 16001

Contact: Michael Tenney
Tenney Equipment Company
Ph: 724-748-6500
email: mtenney@zoominternet.net

 

Cold Jet Aero 40 Dry Ice Blaster
Easy to operate - works great! Only 95 hours used.
Includes 80' of hoses.
Contact: Chris Turner
678 381-5278
email: pureairhomes@gmail.com
Snellville, Georgia, USA
 $12,400 USD

 

 

Triventek TRIBLAST 2

Complete with hoses and nozzles

This Machine is ready to ship  anywhere from Canada.


See Pictures and more information

 

Cold Jet Aero 75DX
We have a used Cold Jet Aero 75DX Dry Ice Blasting machine

 It comes with:

  • 1 used 20' air supply hose with Chicago Quick Disconnect

  • 1 used 20' blast hose1

  • 1 used 20' cryogenic blast hose

  • 1 brand new 20' blast hose (non-ColdJet supplied).

  • 1 Standard 1" spray nozzle.

  • 1 Select a size nozzle with three different settings. It was $2200.00 when purchased, in good shape.

  • We also have a 4" nozzle.

It also comes with some new replacements parts (ie, trigger switch, white rotor base, bearings). The rotor and rotor base that is in the machine now only has about 10 hours of run time on it. Has 4 new bearing installed and 4 new additional (as stated above) for backup. Machine was used in industrial settings. I also have the books that go with the machine which I can supply to buyer. It works great!

HIMEC, Corp
Midland, Texas, USA
Contact Angela Miller
812 221-0055
email: himeccorp@gmail.com

All for $12,999 USD

Pick up or arrange shipping at buyers cost. We do have a semi that travels across Texas if you are located in Texas we could probably negotiate a good deal for shipping!

 

KΔRCHER DRY ICE BLASTER IB 15/80


Machine has only 26.0 hours

KΔRCHER DRY ICE BLASTER IB 15/80
We purchased it to do Mould Remediation in September 2011 and used it for two jobs, did some demonstrations, but really never marketed the Mould Remediation aspect of our business - we just got too busy.  Beautiful results and easy to operate. This machine has 26.0 hours.

Equipment for the Karcher INCLUDES:
- HOSE, WAND AND GUN
- FLAT SPRAY NOZZLE
- ROUND JET NOZZLE
- FLAT JET NOZZLE INSERT
- NOZZLE GREASE
We have original instructions etc.

Included items that are not standard:
- EXTRA HOSE SECTION 23’ FT
- DRY ICE SCRAMBLER
- 90 DEGREE NOZZLE
- WATER SEPARATOR (this takes the water out of the compressed air)

Purchase Price US: $21,983.00 Asking Price: $17,000.00 CAD

Contact: Karey Shearing
Location: Vancouver, BC
Email: weststarltd@shaw.ca
Phone: 604 324-0359 or
604 861-8131
It can be shipped easily.

 

COLD JET P750 DRY ICE PRODUCTION EQUIPMENT
 
DRY ICE PRODUCTION 500 LBS/HR
 

460V/480V TRANSFORMER, AVAILABLE
See Pictures and more information
COLD JET Aero 40HP DRY ICE BLASTER
 
(2 Sets) AERO 40HP DRY ICE BLASTERS
EACH WITH AFTER COOLER
See Pictures and more information
 
COLD JET i3 MICROCLEAN
HOSES, UTILITY CART, 
DRY ICE STORAGE COOLER, AND NOZZLES
See Pictures and more information
 
COLD JET i3 ICE PRESS BLOCK PRODUCTION UNIT
6” (150MM) X 6” (150MM), PNEUMATIC
 
See Pictures and more information
 
Cold Jet Aero C100

 


It only has 3.9 hours on it and is in really great condition.

Comes with everything shown in pictures, hose lengths are 60 ft. and 25 ft. It does come with after cooler hose which is 5 ft. but after cooler is not included.

 

This unit was only used for one job


 

Asking $20,000 USD
Jacobra Energy Services, LLC
1769 FM 177
East Jacksonville, TX 75766
Contact: Gabby Whatley
Office: 903-894-3802
Email: gabby_jacobra@prodigy.net

 

 

Cold Jet Aero 40HP SOLD and Sullair Air Compressor (Still Available)
Cold Jet Aero 40 HP  This unit was a Cold Jet demo model that we bought from Red-d-arc with 200 hours of demo use.

325 Hours

2 - 20’ blast hose 1 Ό “
1- 20’ blast hose 1”
1-20’ air supply hose
1- 523M1 High Flow Nozzle 150cfm 1” x 23” blast swath 5E0138
1- 523V2 Mern Nozzle 150cfm 2” x 33” blast swath W/ fragmenting 5E238
1- 307A45H1 45 degree nozzle Aero series
1-collar and reducer for 45 degree nozzle attachment QCM Ύ” JICF #2E0360A
1- Aero Tech Applicator- pistol with halogen light mount

$18,900 SOLD

Sullair 375HHAF air compressor high pressure and high output on board air dryer - manufactured 2008 with the John Deer motor.
Low 810 hours.
$24,900

Contact
Robert Harrison
702-395-1315
email:
robert@cleanworksblasting.com
Las Vegas NV

 

 Complete Blasting Service Equipment


Trailer - Wells Cargo 20'

The trailer is operational and can have it roadworthy in a very short period of time.  We also have a vehicle capable of delivering the entire load  if needed.

Alpheus Blaster

Equipment for everything

125' of 2" hose, 200' of 1.5" hose
3 pieces of 50' hose 1.5"
One gun: Mini blast DL5.
One gun: Mini blast plt5.
Gloves, full array of connectors and tips

Copco John Deere 110 Diesel Air Compressor
385 cu/ft/min
with 897 hours.

 

2 H & R dry ice storage boxes on wheels
More pictures available.
We used this trailer, compressor, hoses, (2) dry ice storage boxes, blaster and nozzles, to travel to shipyards and blast clean boat hulls. Now retired. Located near Philadelphia, PA, and can be easily moved.
All for only $39,000 USD
Contact: Dan Donohue:
Donohue Auto Sales
484-686-9556
Donohueautosales@icloud.com

 

(2) Aero 80DX Machines
Buy One or Both!

These Machines are ready to ship anywhere from Costa Rica

See Pictures and more information

 

Cold Jet P325 Pellitizer
2 Dies for pellets or nuggets
This Machine is ready to ship  anywhere from Costa Rica.
See Pictures and more information

 

Cold Jet Dry Ice Press
This Machine is ready to ship  anywhere from Costa Rica.
See Pictures and more information

 

i3MicroClean
(Only 6 Hours use)

This Machine is ready to ship  anywhere from Costa Rica.

See Pictures and more information

 

ASCO Automatic Dry Ice Machine BP407-CNC
 
Sandip Kamath Manager - Operations & Business Development
CARBONIC INTERNATIONAL FZCO., P. O. Box 261198, Jebel Ali Free Zone, Dubai, United Arab Emirates
Phone: +971-4-8861960, Fax: +971-4-8861961 Email: sandip@carbonicinternational.com

Price: $69,500 USD - Fixed Price

 

6000 Liters Carbon Dioxide Transport Tank
 
Sandip Kamath Manager - Operations & Business Development
CARBONIC INTERNATIONAL FZCO., P. O. Box 261198, Jebel Ali Free Zone, Dubai, United Arab Emirates
Phone: +971-4-8861960, Fax: +971-4-8861961 Email: sandip@carbonicinternational.com

Price: $18,500 USD

 

COLD JET SDI SELECT 60, After Cooler,
and much more!

Brand new machine works great

Bought it May of 2013

25 hours

1- COLD JET SDI SELECT 60, PRESSURE REGULATED, 110V
1- AFTER COOLER, 400P; 2M0023-G1. Serial# 644
1- APLICATOR W/O LIGHT ATTACHMENT; 2E0425-G1
1- BLAST HOSE, 1 X20 FT, ELECTRIC, RUBBER, 2N0307
2- BLAST HOSE, 1 Ό X20 FT, ELECTRIC, RUBBER, AERO SERIES
2- BLAST HOSE, 1 1/2 X20 FT, ELECTRIC, RUBBER, AERO SERIES
1- NOZZLE 323V2, 5E0252
1- NOZZLE 523S3; 5E0190
1- NOZZLE 106S.6, 5E0421
2- 3/4” X 50 FT AIR HOSE
GROUND CABLE, FITTINGS AND 2 NOZZLE HANDLES

Shrink wrapped and banded to pallet, ready to ship from Fort Benton, MT 59442. Need a week and a half notice to ship from Billings, MT 59102.

.
 

Took a job with one of the local refineries. Used it to clean a couple vessel interiors and some fire damage.

Everything for only $35,000.00 USD Nicholas Larson
406.696.7339
email: ncklrsn@gmail.com

 

 

Cold Jet AeRO 75-DX with After Cooler

Purchased New
Cold Jet 75 HIGH PRESSURE
Cold jet after cooler
Gun and two hoses with fragment nozzle and other attachments.
Low Hours - 436
No longer need equipment.
Asking price $19,500.00

Ask for: Kaycee
American Quality Coatings
East Wenatchee, WA
509.663.1300
email: kaycee@aqcpaint.com

 

Cold Jet i³ MicroClean Dry Ice Blasting Machine

Cold Jet i³ MicroClean

We have a Cold Jet i³ MicroClean Dry Ice Blasting Machine that we purchased back in early 2012 and ended up not using/needing.

 

 

The unit is basically in brand new condition as it was never used for production but only used for a couple of demo runs. I have attached pictures of this unit which shows the actual condition of the unit.

Unique Features
· Efficiently uses dry ice providing as much as 45 minutes of cleaning before reloading
· Single-hose, patented feeder design for maximum blasting aggression
· Uses 5" x 5" x 10" (12.7 cm x 12.7 cm x 25.4 cm) or 6" x 6" x 12" (15 cm x 15 cm x 30 cm) block dry ice
· Adjustable blast pressure allows for flexibility in order to optimize performance
· Internal blast air filter (20 Micron) minimizes the effects of contaminated air
· Ergonomic lighted applicator
· Durable Urebrade, or flexible silicone, hoses available
· Integrated static bonding cable (much more effective than standard grounding cables)
· Durable transport/mobility cart

Specifications
· Hopper size: 20 lbs (9.1 kg)
· Feed rate: 0-1.2 lbs/min (0-0.5 kg/min)
· Dimensions: 22" x 16" x 21" (55.9 x 40.6 x 53.3 cm)
· Weight: 130 lbs (59.1 kg)
· Air consumption: 12-50 CFM (0.3-1.4 m³/min) at 140 PSI (9.7 bar)
·
Blast pressure: 20-140 PSI (1.4-9.7 bar)
· Min Blast pressure: 20 PSI (1.4 bar) with optional pressure regulator
· Inlet air connection - 3/8" quick-disconnect coupler
· Part # 2A0169

The i³ MicroClean dry ice blasting system includes:
· One length of 3/8" (9.5 mm) Urebrade blast hose
· One length of air hose
· Ergonomic lighted applicator
· Customer-specified nozzle
· Transport cart

Extra Nozzles also included:
· MC25A90 - 90° angled nozzle - 0.25" (6 mm) blast swath.
·
MC29MH - 0.29" (7.4 mm) blast swath - MERN Technology nozzle.
·
MC88F - 25 cfm (0.7 m³/min) Fragmenting Fan Blast swath nozzle.
·
MC25A45 - 45° angled nozzle - 0.25" (6 mm) blast swath.

Our asking price for the unit along with the extra nozzles is:
 Price: $21,000 USD

Contact: Michael Cate
MVTS Technologies
1940 Camino Vida Roble
Carlsbad, CA 92008

email: Michael.Cate@mvts.com
• Direct: (760) 795-2504
• Main: (760) 930-8950
• Fax: (760) 929-2921

Unit is located in Bangkok, Thailand, but can be brought back to the USA for no additional cost.

 

Nu Ice Age Commando 55 Dry Ice Blasting Machine

                                                         COMMANDO 55 MACHINE FEATURES:
Comes with (2) 25 ft (7.6 m) blasting hose, (2) guns with LED light, extension, , ice scoop and protective cover.
350 feet of 1" compressor hose for BIG jobs with NPT fittings. ( NOT PICTURED )
A FULL RANGE of attachments/nozzles. THERE IS A LOT OF EXTRA VALUE HERE!

This machine has only been used for 3 weeks and is in excellent conditions and works well. Contact me if you would like to see videos of me using this machine in action. The capabilities of dry ice blasting are just amazing!

  • Easy to use with minimal training required.

  • Compact size and wheels make this machine easy to transport and maneuver while cleaning.

  • Adjustable blast pressure and pellet feed rate.

  • Tough stainless steel enclosed body built for heavy duty industrial use.

  • Static ground cable included to reduce the risk of static electric shock in certain blasting applications.

  • Spun stainless steel hopper design prevents ice bridging.

MACHINE SPECIFICATIONS:

  • 117 Hours used
  • Hopper Capacity: 55 lb (25 kg)
  • Electrical Requirements: 110v / 10 amps
  • Air Requirements: 100 PSI @ 200+ scfm (5.5 m³/min)
  • Blasting Air Pressure Range: 30 – 225 psi
  • Accepts 1.7 to 4 mm dry ice pellets
  • Weight: 198 lbs (90 kg), empty
  • Dimensions: 39” H x 23.2” W x 33.25” L
    (1 m x 589 mm x 845 mm)

PRICE: $14,000 USD or best offer

Shipping is extra and includes 350 feet of 1" compressor hose along with the machine and 2 cases for the attachments and spare parts. For serious buyers I can get a quote for motor freight delivery, or pick up can be arranged ( Located 1 hour north of Chicago, 1 hour south of Milwaukee. Contact : Jason Saunders
815-276-5034 (cell)

Machine is Located at: 7701 Cedar Rd., Wonderlake, IL
email: jbonz71@gmail.com

 

Cold Jet Cryogenic RDS 500 CUB dry ice blaster and AIR DRYER


Blaster needs a new blasting gun and nozzle for your application. It also needs a new ice feeder rotor.


VERY LOW hours - 37.5

For more than 20 years Cold Jet has led the development of dry ice blasting technology - setting the standard for quality, performance and reliability. Cold Jet offers the widest selection, most reliable and most innovative dry ice blasting systems that use half the ice, air and manpower of competitors' systems. Cold Jet's dry ice blast cleaning solutions pay for themselves in just a few months, providing an impressive R.O.I. on systems designed to last. Just blaster new is $37,000 not including air dryer.

Dry ice blasting....
 - is a non-abrasive, nonflammable and nonconductive cleaning method.
 - is environmentally-friendly and contains no secondary contaminants such as solvents or grit media.
 - is clean and approved for use in the food industry.
 - allows most items to be cleaned in place without time-consuming disassembly.
 - can be used without damaging active electrical or mechanical parts or creating fire hazards.
 - can be used to remove production residues, release agents, contaminants, paints, oils and biofilms.
 - can be as gentle as dusting smoke damage from books or as aggressive as removing weld slag from tooling.
 - can be used for many general cleaning applications.

Dry Ice (CO2) Blasting is the convenient and environmentally-friendly cleaning solution for . . .
« MOTORS, PUMPS
« ROBOT ARMS, WELDERS
« CHAIN, CONVEYORS
« CIRCUIT BOARDS, ELECTRONICS
« MAN FANS
« ROLLERS-PRINT PRESSES
« AIR CONDITIONERS
« MOLDS-PLASTIC INJECTION
« TOOLS, DYES
« MOLD/MILDEW REMOVAL
« CLAMPS, TROLLEYS
« FIRE RESTORATION
« HEAT EXCHANGERS
« EQUIPMENT REFURBISHMENT

Graham-White 5in1 Desiccant air dryer, Model# D29C18


Very Good Condition!
ITS A GREAT DEAL

Graham-White 5in1 Desiccant air dryer, Model# D29C18 / Serial# 082891.5/ 115volt 60hz./ Supply pressure 100 to 150 psi @350 SCFM. This air dryer is hands down, the best 100 % dry air dryer made. If you need 100% CLEAN-DRY-AIR for your application (example) computer or electronics assembly, custom car painting, food processing, control-air for HVAC, Medical and Dental Air, The unit will handle air supply of up to 350 SCFM iso compliant application where you have to recover all oil and exhaust form air system, This air dryer by it self was $12000.00 IT'S A GREAT DEAL, to someone that needs 100% CLEAN-DRY AIR cooler portable
Graham White 5-in-1 Air System Air Filtration & Dryer Unit for air compressor as well

As this is a Very Compact & Easily Portable model (nice, as space is always at a Premium), it would be a Great Asset to any Manufacturing Tool room Facility, Garage Shop, Sand-Blasting/Painting Application, Start-up, or possibly even the At-Home User. This unit is in Very Good Condition, and was removed from a working environment. Heated unit for evaporative air compressor dryer.
 

For more information contact:
 Teddy Attell
415 715-1135
Email: teddy@teamattell.com
San Francisco, CA, USA

All this for only $8,000

 

MICROBLAST MB 368 BIK
Description

Manufacturer's MEC MB BIK web page

Declaration of testing

Declaration of pf conformity

Technical data
Operating pressure = 2,5χ8,5 bar
Compressed air consumption(*) = 3,3χ4,4 mc/min at 6 bar
Dry ice capacity = 40 kg
Dry ice consumption = 30χ60 kg/h
Bicarbonate consumption = 2χ4 kg/h
Dimensions = 300 x 480 x h 800 mm.
Weight = 45 kg. (36 + 4 pipes)
Air connection = 1" BSP
Dual hose - Pneumatic functioning - Venturi system Powder mixer
Bicarbonate feeder
"Coax" blasting gun with 3,5 mt hose
Manual

The MB/AL – BIK is supplied complete with the "Coax" gun with 3.5 mt hose and cylindrical nozzle. The dry ice tank has a capacity of 40 kg allowing the machine to be used for 45-60 minutes before refilling. With an operating pressure of up to 8 bar, the MB/AL - BIK provides extremely effective cleaning in short time. The machine weights 40 kg. Its compact size allows to be fitted even in narrow spaces and in production areas. The MB/AL - BIK dual – hose unit uses dry ice pellets with a diameter of 3 mm.

 Price: €6,500 

Carmel Doran
Specialized Cleaning Services
Ballyfrory, Duncormick, County Wexford, Ireland

Tel: +353 (0)51 563171
Email: info@specializedcleaning.ie
Web: www.specializedcleaning.ie

 

 Alpheus 320 pelletizer

Alpheus 320 Pellet Master
ASKING PRICE IS $10,000.00 USD

Specifications: Model: 320 Voltage: 220  Phase: 3 Full Load Amps: 55.5

We believe that the machine will produces between 100-200 pounds per hour of 2.9mm high density pellet dependent on several factors.

Contact: Rob Tichenor
Continental Carbonics
217-428-2069 x295
Email:
rtichenor@continentalcarbonic.com

As is, where is, customer is responsible for shipping arrangements.

Alpheus 320 pelletizer
service manual

FOB: Continental Carbonics, Brookhaven, MS

 

TOMCO2 Dry Ice Blasting Machines Model: FS TDI G3

For sale are 2 TOMCO dry ice blasting machines. One for sure is in working order.
The second machine with a little tinkering could be put back into service.

This package deal comes with a third machine that has been cannibalized for parts, so it is good for parts.

The package comes with 4 blast hoses, 3 guns, 3 nozzles as well as a large assortment of spare parts including many clippard valves which are used to control the machines. We also have some manuals and blueprints of how the machines work! This is a great price for someone starting out in dry ice blasting to learn and grow a dry ice blasting business. With a little finesse and mechanical ability you can have at least two machines working and making you money!

Any questions please feel free to contact Kent: kent@billingsblasting.com. You can leave your phone number and I will be glad to call you back.
Location: Glastonbury, Connecticut, USA

The price for all of this is $5500.00 Best Offer

 

Cold Jet Aero 40 HP with After Cooler - SOLD

After Cooler

Only 136 hours

  • Aero40 HP (high pressure) Dry Ice Machine (136 hours), purchased new in 2012

  • After Cooler

  • 2 nozzles

  • 1 applicator with light

  • 1- 20' X 1 1/4" blast hose

  • 1- 20' X 1" blast hose

  • 4 lengths of air hose with swivel
    1- 40' static bond cable

  • Salesman's tote for Dry Ice Demos Model number HR04P

Contact: Matthew Winslow
Next Step Environmental Services
Barto, PA, USA
1-866-794-3050
fax 610-880-0223
nextstepenvironmental@gmail.com
 

           $18,500 USD SOLD !

 

Farrow 250 Max System
A more aggressive blasting system than dry ice blasting.
 

Farrow 250Max System (50 hours) Purchased new in 2013.
Unit mounted to a cart from factory (600 pound capacity) for mobility and convenience.
70 Gallon water tank.
2 fifty foot hoses.
Blasting nozzle.
2 fifty pound bags of volcanic abrasive media.

$14,500 USD
Still Available

 

Farrow 250 Max System
Download brochure (.pdf)

Contact: Matthew Winslow
Next Step Environmental Services
Barto, PA, USA
1-866-794-3050
fax 610-880-0223
nextstepenvironmental@gmail.com
 

 

 AeRO 80-DX Dry Ice Blasting Machine

We have 25ft of hose and three applicators.
 It has been used for only 101hours including 70 hours as a demo for Cold Jet.
We did not use it enough to keep it.
It is in very good shape.

Only $18,000.00 USD
Chris Miehe
American Pattern
319 404-2073
Cedar Falls, Iowa, USA
email: cmiehe@americanpattern.com

Alpheus Clean Blast 250 Pelletizer 
 



 

Alpheus rice "pelletizer" that makes 250 lbs / hour and was originally designed to be used with a dry ice blaster.
Perfect for dry ice needed for blasters or shipping frozen products.
Push button, electronic, fully automatic controls with 3 phase, 480V power.
Sold 'as is' FOB Vancouver, Canada

Available today for: $9,500USD
Contact: Tyler Anderson 604-524-0609
email: tyler@icebergdryice.com

 

Cold Jet Block Master


Cold Jet Block Master makes 250 lbs/hr of 5" x 5" x 10" blocks of dry ice weighing about 15 lbs each.
Designed for manufacturing blocks of dry ice for a Cold Jet T2 blaster.
Perfect for dry ice needed for shipping frozen products.
Push button, electronic, fully automatic controls with 3 phase, 480V power.
Sold 'as is' FOB Vancouver, Canada

Available today for: $9,500 USD
Contact: Tyler Anderson 604-524-0609
email: tyler@icebergdryice.com

 

Alpheus SDI-5 Dry Ice Blasting Machine with Blast Hose
 
$10,000 USD Other units priced individually

Specifications:

• Very Good Condition
• Nozzle and 25ft Blast gun/hose included
• Other attachments sold separately
• Hopper Capacity: up to 120lbs (54.5kg)
• Variable Feed Rate: 1-6 lbs (0.5 to 2.7 kg) per minute
• Blast Pressure Range: 40-250 psi (2.8-17.2 bar)
• Weight: 430lbs (195.5kg)
• Size (L x W x H): 37” x 24.5” x 45” (94 x 62.2 x 114.3 cm)
• Multiple units available
• Also selling PLT-5X, MBL-5, PHX-150, and PHX-200 blasting machines

This pneumatic blasting machine is a dual-hose system and utilizes dry ice block, nuggets or pellets, allowing for a variety of applications. PRICE INCLUDES 1 YEAR CUSTOMER SUPPORT/EQUIPMENT CONSULTING.

Enviro-Blast Services LLC
7065 E. Eight Mile Rd Warren, MI 48091
(586) 756-4570
conor@3eengineering.com                www.enviro-blast.com
 
Cold Jet Aero 30

171 Hours

  Includes:
1. AeRO 30, manufactured March, 2006. 171 hours.
2. Blast hose, 40 ft
3. Blast cable, 40 ft
4. Blast applicator
5. Nozzle, 3”
6. Nozzle, 2”
7. Nozzle deflector
8. Air hose, 1”, 25 ft long
9. Ice bath – used instead of after cooler.
10. Separator
11. Operator’s manuals, operation CDs, promotional CDs

COLD JET AERO 30 Only $14,990 USD

Additional photos upon request.
Contact: Janice@DisasterRestorations.com for more details: 541.928.7267
Albany, Oregon.

 

SDI-5

2000 SDI-5 fully rebuilt, comes with new hoses and nozzle.

Includes a 90 day warranty.

$12,500.00 USD

Contact: Pat Schrock
pschrock@wickens.com

Wickens Dry Ice Blasting
Milton, Ontario, Canada
1 888 301 0044 xt 31
(905) 693-5042

Currency conversion available:

Phoenix PHX -150
Standard Package
Phoenix PHX-150
Used

Compact and Light Weight
Best in Class JLG's

14' x 15' x 46' & 140 lbs
Single Hose
Air Only 1" Min. Constriction

Multiple Units Available

PRICED TO SELL

John Perozek – 734 765 9685
http://www.mesdryicecleaning.com
Detroit, Michigan

 


There are many more buyers all over the world looking for dry ice and dry ice blast cleaning equipment.

Find a new home for your used equipment here!
 

Recently SOLD Blasting Machines
COLD JET Aero 75 with After Cooler SOLD in 14 days!
 

We purchased this for a customer at Auction and they never picked it up.

Unique Features:
•  Variable dry ice pellet feed rate of up to 7lbs (3.2 kg) per minute
•  Patented isolated hopper supports dry ice pellet flow while reducing vibration and noise
•  Hour meter that will aid in tracking maintenance intervals, job or department costing
•  Hopper lid has a unique sliding screen design incorporating a safety interlock switch that disables machine  when  open
• 75 lb (34 kg) hopper

AeRO 75 Dry Ice Blasting Machine

Dry Ice machine Unit only has 70 hours use.
This single-hose low pressure, electric dry ice blast cleaning system that utilizes dry ice pellets in a patented aerodynamic rotor which assure high reliability and smooth pulse-free dry ice blast flow at pressures up to 140 psi (9.7 bar).

Toni Chauvin

All this for $16,000.00

Louisiana Auto and Truck Repair, Inc.
Grosse Tete, Lousania, USA

 

Triventek TRIBLAST 2 SOLD in 7 days

Complete with hoses and nozzles: $11,900 USD

This Machine is ready to ship  anywhere from Canada.


See Pictures and more information

 

Cold Jet Aero 30 with After Cooler SOLD in 7 months

After Cooler

Only 140 hours
Both for $10,800 USD

Duane Smith
720 201-6395
Parker, Colorado, USA

 

Serial number: 61L2-F 592
Volts: AC 100- 120
Amps: 10
Phase: 1
HP: 1/3

 

 

Coldjet CO2 MiniBlaster Alpheus SDI-5 SOLD in 39 days

Now $9,700
This Machine is skidded and ready to ship for approximately $5-600.00 anywhere in the US.

See Pictures and complete information
COLD JET AERO 40HP WITH AFTER COOLER
SOLD
in 67 days for asking price
 

Equipment package includes the following:

 AERO 40 HP Blast Unit
 Cold Jet 400P After-Cooler
 Applicator w/Light Attachment
 NEW- (1) 1”X25’ Air Supply Hose w/swivel
 (2) 1”x20’ Blast Hoses: (1 NEW, 1 GENTLY USED)
 (1) Fragmenting Nozzle
 (1) Standard Nozzle
 NEW- 100’ Chicago Hose
 50’ 110v Power Cord, Hard Hat, Shield & Scoop

COLD JET AERO 40 HP WITH AFTER COOLER

Date of Manufacture is April 2011
Machine has 286 hours usage
** Cold Jet Factory Inspected and Serviced May, 2013 @283 hours**

For more information call: Ruben Walden

EQUIPMENT IS LOCATED IN Ft. Meyers, FL 33919

Price $17,900.00 USD

 

Cold Jet VHS 2000 SOLD in 6 months
"The dry ice machine sold for the asking price. i want to thank you for your services and good luck to you in the future, again thanks for everything" - Neil
$7,000 CAN

Approximately 208 hours on the machine,
Was refurbished with a vibrator by ColdJet
Approximately 70 feet of blast hose
2 nozzles one inch and a two inch along with
   an angle attachment
6 foot stainless pipe extension
Machine is in decent working order (tried it today)

Shipping and price can be discussed. Machine is in:
Creston, British Columbia, Canada.

For more information please call:
 Neil Farstad at: 1-250-428-1534

 

Ice Tech KG 30 Blasting System SOLD in 4 months

Ice Tech KG 30 Blasting System
Meticulously maintained dry ice blasting system - after cooler and water separator included,
all you need is an air compressor to get started.

KG 30 specs:
Year: 2008
Manufacturer: Ice Tech
Model: KG30
Location: Phoenix, AZ
Serial number: 08-05-17
Condition: Used
Hours: 466

System includes:
• Ice Tech KG 30 dry ice blaster w/ stock 33' blast hose and Ice Gun
• Variety of nozzles: Standard round nozzle, 2" flat nozzle, Splitter nozzle ; 3" flat nozzle
• After-cooler
• Water separator

 

• Professional Heavy Duty
• Dimensions mm/inch: • Length: 580 / 22.8 • Width: 550 / 21.6 • Height: 800 / 31.4
• Weight: kg: 85 / lbs: 187
• Dry Ice Hopper Capacity: kg: 30 / lbs: 66
• Dry Ice Consumption: kg/hr: 0-100 / lbs/hr: 0-220 infinitely adjustable
• Supply Pressure: bar: min. 5 - max 16 psi: /min 72 - max 232
• Blasting Pressure: bar: min. 2 - max 16/ psi: min 29 - max 232
• Air Consumption: cfm: 25 - 388 /depending on nozzle combination
• Connection: 1” claw
• Power Consumption: 110/230 VAC 50-60 Hz 800 W
• User-friendly control panel/ hour meter
• Blast hose 33 ft

Price: $16,900.00 USD Sold!
For more information call: Matt Beller Delivery within 250 miles. Also, shipping can be arranged. Item location:
6005 S. 40th St
Phoenix, AZ 85040

 

Cold Jet Aero 40 with after cooler SOLD in 4 months
AFTER COOLER UNIT, 400P, PNEUMATIC BLAST UNIT, AERO 40, 110 V
Only 67 Hours

1 EA | 2E0425-G2-A APPLICATOR WITH LIGHT AERO TECH, 1 IN JICM, ELECTRIC, AERO 40

1 EA | 2N0199 HOSE, AIR SUPPLY, 1 IN X 0.00 25 FT, NPTF SWIVEL FITTING ON ONE END, RUBBER, AERO 40,

1 EA | 2N0200-G1-A HOSE, BLAST, 1 IN X 20 FT, ELECTRIC, UREBRADE 1 EA |  2N0203-G1 HOSE, BLAST, 1 1/4 IN X 20 FT, ELECTRIC, UREBRADE

1 EA | 5E0190 NOZZLE, 523S3, ALUMINUM,

1 EA | 5E0274 NOZZLE, 312V2, ALUMINUM, AERO SERIES

1 EA | 5E0175 NOZZLE, 323S1, ALUMINUM,

$18,900.00 USD Sold!

Contact:
Randy Marler
405-808-7253
Norman , Oklahoma 73072

 

IceTech KG30 Pro SOLD in 77 days

 

Very well maintained machine, electrical wiring has been upgraded, handle added to the back, and has a new dosing disc. This package retails new for over $25,000 plus taxes and shipping.

Package comes complete with: (2) x 33 foot lengths of blast hose (7 meters each), 2 blasting guns, 1 standard nozzle and one 2010 KG30 Pro Blasting unit.
 

 

Great contractor starting kit!

Shipping is extra (from Calgary, Alberta.)

See: Bryan Hawley

(403) 697-3127 (w)

(403) 585-9614 (c)

www.scrubzero.com

Asking $13,500 (CAD), plus GST

 

Karcher IB 15/80 Dry Ice Blaster
SOLD
in under 4 months
 
Priced to sell at $15,500 USD
Cold Jet After Cooler 400 P/E also available for additional price

This is a great opportunity to save a few bucks on a solid used machine.

We are a distributor of these machines and this has been in our rental fleet, professionally maintained and serviced unit.

Everything works as new and this machine has a lot of life left in it at only 266 hours and 25 minutes of run time. Blasting hose is still in great condition and includes a wide spray fan nozzle and a pencil jet nozzle for a variety of applications. Cold Jet After Cooler available for more effective use of dry ice.

Burtek Dry Ice
Des Moines, IA
Call Eric at:
515-243-4226 Mon-Fri 7 AM- 3PM or
email: ericv@burtekdryice.com for more information.
COLD JET AERO 40 HP WITH AFTER COOLER
SOLD
in 68 days

Equipment package includes the following:

AERO 40 HP Blast Unit
Cold Jet 400P After-Cooler
Applicator w/Light Attachment
NEW- (1) 1”X25’ Air Supply Hose w/swivel
(2) 1”x20’ Blast Hoses: (1 NEW, 1 GENTLY USED)
(1) Fragmenting Nozzle
(1) Standard Nozzle
NEW- 100’ Chicago Hose
50’ 110v Power Cord, Hard Hat, Shield & Scoop

COLD JET AERO 40 HP WITH AFTER COOLER


Date of Manufacture is April 2011
Machine has 286 hours usage
** Cold Jet Factory Inspected and Serviced May, 2013 @283 hours**

REDUCED!! . . . Now only $17,500.00 USD
EQUIPMENT IS LOCATED IN CRESTWOOD, KY 40014
 
 

 

COLDJET AeRO 30 Dry Ice Blasting Machine and After Cooler
SOLD in 24 days

(Less than 1 Hour use)
Now $14,995

See Pictures and complete information

 

 Dry Ice Blasting, Soda Blasting, Flood and Fire Restoration Equipment for sale
SOLD in 44 days

All that's needed for a complete business.
Including customers if you want to locate in North Toronto area, Canada.
Pictures and complete information

 

Cold Jet Aero 40 SOLD in 25 days
2010 Unit with 1 Hr (Demo time during training)
Part Number: Description:
2A0176-G1-C Unit, Dry Ice Blasting, Aero 40, 110V
2N0199 Hose, Air Supply, 1in x 25ft, NPTF Swivel Fitting on one end, rubber, aero 40, aero 80 series, aero C100
2N0222-G2-A (Qty 3) Hose, Blast, 1in x 20ft, Electric, Rubber, Aero 30 Series, Aero 40, Aero 80 series
3N0088 Clamp, Bonding Cable, 1in
2E0425-G1-A Applicator w/o Light, Aero Tech, 1in JICM, Electric, Aero 40, Aero 80 Series
5E0257 Nozzle, 523V4, Aluminum, Aero Series
5E0175 Nozzle, 323S1, Aluminum, Aero Series
2E0209A Handle, Nozzle and Tube, 1in
2N0199 Hose, Air Supply, 1in x 25ft, NPTF Swivel Fitting one end, Rubber, Aero 40, Aero 80 Series, Aero C100
2N0223-G2-A (Qty 3) Hose, Blast, 1 1/4in x 20ft, Electric, Rubber, Aero 30 Series, Aero 40, Aero 80 Series
3N0089 Clamp, Bonding Cable 1 1/4in
20HTX-S Fitting, Coupling, 1 1/4in JIMC, Plated Steel

$18,000.00 (SOLD in 25 days) 

Located at:
Walmart DC 6048
3160 Hwy 743
Opelousas, LA 70570
For More Information,
Contact Steve
 
"Ken,
We wanted to let you know that your website is doing an excellent job! We just received payment from one of the (two customers) interested!
So we are all set, and you are free to take ours down and mark it sold! Thank you so much for all of your help and guidance with this piece in your area of expertise!
Have a wonderful & Blessed Weekend,
Alyssa"

 

CO2 MiniBlast Model SDI-5 Dry Ice Blasting Machine
SOLD in 56 days

Includes 2 X 600 lb. capacity rolling
ice totes. $1600.00 Value

Quick specs:
Dimensions: 24½" x 37" x 45" (W x L x H)
Dry Weight: 430 pounds
Supply Pressure Range: 75-300 psig
Blast Pressure Range: 40-250 psig *
Storage Capacity: 120 pounds of dry ice
Ice Consumption: 1-6 lbs/min.

Includes:
-2 dry ice boxes. Model: HRIOCFP.
-Service hose's
-Nozzle
-25 Feet Hose

CO2 MiniBlast
Model: SDI-5
MFG: Cold Jet/Alpheus Cleaning Technologies

This machine was used briefly as an evaluation unit by a large pharmaceutical company, and then put into storage. The machine is in excellent like-new condition.

The CO2 MiniBlast™ SDI-5 is a compact unit at only 24.5" wide. This unit is forklift accessible from all four sides with four-corner lifting and tie-down lugs. Primarily a dry ice block machine with a capacity of 120 pounds that lengthens time between refills. The unit also offers a broad range of cleaning capabilities--adjust dry ice feed rates and choose from a number of blasting pressures. Benefit from repeatable process control with regulated air and a two mode feeder selector. The CO2 SDI-5™ includes a cleaning gun and 25' of standard blast hose with the possibility of extending the hose length.

SKU:180049
Model Number SDI-5.
Serial Number 69146F351
Age 1997
Condition of Machine: Used: Excellent Condition

Asking Price $9,950.00 USD
for a quick sale
Location: USA Warehouse
Core Asset Remarketing
2705 Bateman Trail
London, ON, Canada N6L 0A6
Email: matt@ctnt.ca
Please call: Matt at (519) 872-2673
Core Asset Remarketing
2705 Bateman Trail
London, ON, Canada N6L 0A6
 

 

Cold Jet Aero 75-DX SOLD through another ad
 

67 Hours

This unit was purchased in 2005 and used in our plastic injection molding facility to clean molds with only 67 hours on it. When Cold Jet came out with the Micro-Clean, we purchased three of them because of their smaller size. Once the Micro-Clean units hit our shop floor the Aero DX-75 was placed in storage and now we would like to sell it.

This is a very clean well maintained unit that is 100% ready to go to work for you. It comes with three wands as shown and a female quick disconnect for 3/4" air supply.

Asking Price is $13,900 USD

Contact: Todd Borland
Lincoln, NE 68521

LT-280 Double Action Dry Ice Blaster (USED – Like New)
SOLD in 21 Days!
Crystal Particle Blast Cleaning (more)

The LT-280 is the ultimate in flexibility with our patented, integrated pellet grinding system. Apart from conventional pellet blasting capabilities, the LT-280 gives you particle blasting capability.
Adjustable Ice Rate / Adjustable Air Pressure / 45Kg / 100 lbs Ice Hold
The most versatile machine on the market. Two units in one.

Mobile & User Friendly

Pneumatic Controls. No electricity needed.
Compact & Mobile. Only 56 kg / 123 lbs.
Powerful. Up to 15bar/218psi blast pressure.
Economical. Low Dry Ice consumption
Dry Ice is WATER FREE!
Dry Ice is Not Conductive.
No secondary waste! Dry Ice reverts to natural CO2 vapor on impact.
 

System Package Includes
• LT-280 Blast Unit
• 5m/16.5ft Air Hose Package
• Stainless Steel Gun Assembly
• 3 Aluminum Barrels (S/M/L)
• 4 Jet Venturi Inserts
• Detachable Side Grip
• Tool Kit
• Asking Price: $11,500.00 CAN
 
Core Asset Remarketing
2705 Bateman Trail
London, ON, Canada N6L 0A6
Email: matt@ctnt.ca

 

COLD JET 250-FP Dry Ice Blaster For Sale

"it sold sort of fast and almost for the asking price"

COLD JET 250-FP Dry Ice Blaster

Serial No 064, this unit is in excellent looking and running condition. It includes blasting gun and hoses with two thermo wire cords to prevent clogging. These were attached to the hose by the former owner. We used this machine to clean printing machines where electronics were involved and it did a remarkable job.
Very versatile low cost blasting machine.

Priced to sell - $5,900.00 USD

It is loaded and palletized - ready to ship.

TFA Inc., Vaughan, Ontario, Canada

Littmann LT-50 Shop Blaster (Brand New)
SOLD in 4 Days!

 

 

Application Areas
• Small moulds
• Automobile cleaning/maintenance
• Switch cabinets
• Restoration - mold remediation
• Restoration - removal of fire residue
• Textiles and/or textile design equipment
• Electronic components
• Small tools
• HVAC systems

 


Advantages
• Gentle surface cleaning (non-abrasive)
• No blasting media residue
• Easy operation
• Mobile unit (plug into any AC outlet or runs on battery)
• Low volume of compressed air required
• Low dry ice consumption
• Low noise emission

 

System Package Includes

• LT-50 Blasting Unit
• Stainless Steel Blast Gun
• 2.5m/8ft Hose Package
• 2.5m/8ft Grounding Wire
• 12V Battery
• Battery Charger

The LT-50 is a patented tabletop crystal blaster designed for use in machine shops, and is optimally suited for spot-accurate cleaning applications.


 

 

 

Runs on shop air!

 

Compact Stainless Steel Housing
Adjustable Ice Rate
Adjustable Air Rate

Dry Ice (CO2) Blasting is the convenient and environmentally-friendly cleaning solution for …

« MOTORS, PUMPS
« ROBOT ARMS, WELDERS
« CHAIN, CONVEYORS
« CIRCUIT BOARDS, ELECTRONICS
« MAN FANS
« ROLLERS-PRINT PRESSES
« AIR CONDITIONERS
« MOLDS-PLASTIC INJECTION
« TOOLS, DYES
« MOULD/MILDEW REMOVAL
« CLAMPS, TROLLEYS
« FIRE RESTORATION
« HEAT EXCHANGERS
« EQUIPMENT REFURBISHMENT

Technical Details

• Unit Dimensions: 32cm/12.5in(H) x 24cm/9.5in(W) x 32cm/12.5in(D)
• Unit Weight (empty): 15.0 kg / 33 lbs
• Compressed Air Pressure: 10 bar or 145 psi (maximum)
• Noise Emission: 87 dB (maximum)
• Required Air Volume: 200 litres/min or 8 cfm
• Ice Container Fill Quantity: 1.5 kg / 3 lbs
• Ice Consumption (at 6 bar): 7 kg / 15 lbs per hour

For more information please call:
Matt at (519) 872-2673
Core Asset Remarketing
2705 Bateman Trail
London, ON, Canada N6L 0A6
Toll Free Fax: 866-780-7518

New - Lists for $7,500 CAN

• Asking Price: $4,200.00 CAN

Email: matt@ctnt.ca

 Aero 40 LP with After Cooler
SOLD in 9 Months
Hoses 285 Hours Aero 40 LP After Cooler Attachments

 AERO 40 LP 2A0165-G1
- After cooler 400P
- Applicator with light attachment 2E0425-G2
- Fragmenting nozzle 312V2
- Regular nozzle 523S3
- 60 foot air hose with Y to get the most volume out of the compressor
- 1, 20 foot sections of 1" blasting hose
- 2, 20 foot section of 1.25" blasting hose
- 2 bonding cable shaft collars
- 40 foot static bond cable
- Wheel chocks
- These units are about 2 years old with 285 hours
Great working condition

Asking price is $17,900 USD

Will ship or deliver for minimal additional charge depending on location

Contact: Todd R. Maveus
Winston-Salem, NC
 

Everything for a dry ice Blasting Service
SOLD
in under 4 weeks


Aero 40 with only 22 hours
16’ Continental Cargo Trailer

Cold Jet After Cooler 400P

Sullair 185 cfm

BW Oxygen Sensor


Above pictures are stock pictures - actual units may be different. Trailer is actual picture

1 - Cold Jet Aero 40 Blast unit – 22 hours
1 – Cold Jet after cooler unit 400P

60 feet of Urebrade Blast Hose
1” - Air hose
1 - 1-3/16 Handle
1 - 1” Handle
1 - 523 SF 2VMem Nozzle
1 - 523 SF Nozzle
3 - Whipchecks
1 - Sullair 185-cfm 80-125-psi Air Compressor – 2045 hours
1 – 2010 16’ Continental Cargo Trailer
1 – Oxygen Censor – BW Technologies – Gas Alert Extreme 02 Detector
 

 

All this for only $28,000 USD
David Paulus – 231-330-0892
Located in Petoskey, Michigan
Shipping: Buyer must pick up

 
Cold Jet Aero - 75 - DX
SOLD in 15 Days
Machine #1

Seller is willing to provide 1 year of expert consultation

302 hours of operation

Owner is retiring and focusing on other areas of industrial services, offers for sale various dry ice blasting machines and equipment, ie., hoses/nozzles.

We have numerous hoses, nozzles, compressors that we can offer as add on value to machine sale

Machine is sold as-is, and without warranty, expressed or implied, of any kind. Additional pictures available upon request

Location: Lordstown, OH - USA

$14,500

Contact Name: Ray Getz
Mc Donald, OH 44437

 
Cold Jet Aero - 80 - DX
SOLD in 15 Days
Machine #2

Seller is willing to provide 1 year of expert consultation


146 hours of operation

We have numerous hoses, nozzles, compressors that we can offer as add on value to machine sale

Owner is retiring and focusing on other areas of industrial services, offers for sale various dry ice blasting machines and equipment, ie., hoses/nozzles.


Machine is sold as-is, and without warranty, expressed or implied, of any kind. Additional pictures available upon request

Location: Lordstown, OH - USA

$16,500

Contact Name: Ray Getz
 Mc Donald, OH 44437

 
Cold Jet Aero - 75 - DX
SOLD in 15 Days
  Machine #3
Seller is willing to provide 1 year of expert consultation

449 Hours of operation
Owner is retiring and focusing on other areas of industrial services, offers for sale various dry ice blasting machines and equipment, ie., hoses/nozzles.

Machine is sold as-is, and without warranty, expressed or implied, of any kind. Additional pictures available upon request

Location: Lordstown, OH - USA

$13,500

Contact Name: Ray Getz
Mc Donald, OH 44437

 
Dry Ice Blasting Trailer SOLD in 15 Days
 
This is a customized trailer 16.5' by 6.5'  that is capable of hauling up to 4 machines.

 Additional pictures available upon request

Location: Lordstown, OH - USA

Special pricing for all 3 machines together in a package, including custom built trailer: $36,900

Contact Name: Ray Getz
Address:  Mc Donald, OH 44437

Cold Jet Aero 40LP
SOLD in 41 Days
 
8 Hours Cold Jet Aero 40LP - 2A0165-G1 After Cooler 400P
Additional pictures available upon request

Cold Jet Aero 40LP - 2A0165-G1
After Cooler 400P
Applicator with light attachment - 2E0425-G2
Fragment Nozzle
Regular Nozzle - 523HF3
3 20' sections of blasting hose
Wheel Chocks
This unit was manufactured in 10/09
Used only 82 hours
In great working condition

Asking Price is just $17,990

 
COLD JET 2000 High Pressure Dry Ice Blaster
SOLD in 75 Days
Thank-you for your services, I had a lot of interest due to the ad and am still getting calls.
For sale Cold-Jet 2000 High pressure dry ice blaster.
Our first unit purchased in 2003. Still works excellent, just don't use anymore as we have several newer units. Transformer was added to allow use with GFCI's. High pressure unit every bit as capable as the new aero80HP's. Well maintained, everything works except hour meter. Does not come with hoses, uses same hoses as new single hose machines. We will crate, buyer will need to arrange shipping. $5000.00 CND
 
BROTHERS INDUSTRIAL SERVICES LTD.
Ponoka, Alberta, Canada
Aero 80 DX with after cooler SOLD in 6 Months

Four Nozzles: 323V2-5E0252, 523S3, 317A90H1 & 323S1
Over fifty feet of Hose
Only 85 hours on machine
Serial #: 2A0163

Asking Price: $19,999 USD

David Leonard
Owensboro, KY
 

AERO 40 WITH AFTER COOLER
SOLD
in 4 1/2 Months

 
39 Hours

AERO 40 WITH AFTER COOLER

Nozzles

Aero 40 WITH AFTER COOLER

Only 39 hours on machine
After cooler 400P
Fragmenting MERN nozzle - 523V4
Fragmenting MERN nozzle - 312V2
Aggression flow 1” nozzle - 323S1
Medium flow 3” Blast swath nozzle - 523S3
20’ length of blast hose
25’ length of air supply hose
40’ Static bonding cable w/shaft collar

Price $19,995.00 USD

West Chester, Ohio

Kδrcher IB 7/40 Advanced SOLD in 6 Months
   

For sale: Kδrcher IB 7/40 Advanced.

Only 3 hours running time, as new condition.

Comes complete with blasting hose and gun with remote control. Both round nozzle and flat nozzle.

Manual is included as well as standard tool kit.

Asking price: $9,900 USD

Location: Esbjerg, Denmark

Havdigevej 14 - DK 6700 Esbjerg

 AeRO 30 Dry Ice Blaster with After Cooler
Includes
Nozzles and Stanley Mobile Chest
SOLD in 37 days

 

The Cold Jet Aero 30 with only 138 hours on the meter. This lightweight, compact, single-hose electric dry ice blast cleaning system utilizes dry ice pellets in a patented aerodynamic rotor that ensures high reliability and smooth pulse-free dry ice blasting performance.
• Reliable pellet flow
• No clogging
• Easy to maintain
• Safe operation
• Minimal air/ice usage
• Pulse-Free blasting
• Most advanced nozzles
• ESD (static) control
STANLEY 50 Gallon Mobile Chest
This Wheeled Plastic Job Chest with collapsible handle is great for storing the Blaster Handle, Hose and Nozzles.

The Cold Jet After-Cooler
will remove up to 80% of moisture from the ambient air. It will cool the compressed air, which can reach temperatures of 180o - 200o F to within 5o of the ambient temperature. The After-Cooler enables the operator the ability to control the moisture in their blasting environment, allowing them to blast in virtually all temperatures and humidity levels.
• Includes a water separator and a 20 micron particulate filter.
• Heavy duty wheels for easy maneuvering and portability.
• Designed for use with 185 diesel air compressor.
• Reduced ice consumption rates and reduced operating costs.
• Prevents ice condensation and bridging
Six different Nozzles
523S3 Aluminum Nozzle
533S1 Aluminum Nozzle
533S2 Aluminum Nozzle
507S2 Aluminum Nozzle
508M.8 MERN Technology Aluminum Nozzle
114P.5 Polymer Nozzle
Instruction Manual and Demonstration CD

All this for $12,800 USD

Mitch Reeves
LAMUNYON
Cleaning & Restoration
General Manager of Operations
329 W. 5th Ave. Hutchinson, KS 67501

Cold Jet Equipment SOLD All in 4 Months

Excellent condition nearly new

Aero 75 DX   (only used for 4 hours) Microclean 13
Ice Press After Cooler
Only 32.000,00 € for all four machines!

Nour Labidi
General Manager

Al Amal Printing Press
P.O. Box: 38738
Abu Dhabi, United Arab Emirates

Cold Jet Aero 40 Dry Ice Blasting Machine
SOLD in 90 Days

Cold Jet Areo 40          
 

I have an Aero 40 that I want to sell.

$18,750

Time used - 13 hours ● 1 - 20' length of Urebrade blast hose ● 1 - 323S1 - 1' Nozzle
1 - 25' Section of air supply hose ● Static bonding cable w/shaft collar

Low pressure operation - perfect for pre-weld cleaning, printing presses, mold remediation,
disaster recovery, and other areas where the substrate needs to be carefully preserved.

Midwest Dry Ice Blasting, Inc.
26106 Suite3, Newton Circle
, Elko, MN 55020

Cold Jet Aero 75
SOLD
in 48 Days


 
Cold Jet Aero 75 Dry Ice Blasting Machine

· Serial# 5552500

· Hour reading 1152

· Dimensions 34” x 20” x 40”

· Weight 295 lbs

· Includes blast hoses and trigger/gun

$8,900.00

This machine is either used, off-lease, repossessed or consigned by a third party.

This is sold as-is, where-is and without warranty, expressed or implied, of any kind.

Location: Atlanta, Georgia, USA

 

 

Cold Jet RDS 250-FP SOLD in 4 Days

Cold Jet RDS 250-FP Dry Ice Blaster. Excellent Condition.

The Cold Jet Remote Delivery System, RDS 250-FP is a portable unit providing easy access for difficult to reach cleaning applications.

The RDS-250 has a capacity to hold 33 lbs. (15 kg.) of pellets and delivery is variable from approximately 50 lbs. per hour to a maximum of 450 lbs. per hour. The "practical" range is 150-300 lbs. per hour.

We have used the machine for a piece of equipment we no longer have.

Price: $4,500.00

We will skid the unit and quote you on freight.

Contact:
Henry
Superior Fiber Mills, Inc.
Brooklyn, NY 11222

Cold Jet Aero 30 SOLD in 19 Days
Cold Jet Aero 30 3PPM Rotor Dry Ice Blasting Machine

· Hour reading 000491

· Dimensions 30” x 18” x 34”

· Weight 165 lbs

· Includes blast hose; trigger gun is missing

· 110V; electrical pigtail has a hole through sheathing exposing interior wires
 

$6,900.00

This machine is either used, off-lease, repossessed or consigned by a third party.

This is sold as-is, where-is and without warranty, expressed or implied, of any kind.

Location: Atlanta, Georgia, USA

Triventek Triblast-2 SOLD in 2 Weeks
 
Package comes complete with air preparation unit, 2 lengths of blast hose (7 meters each), standard nozzle case, 2 blasting guns and 1 Triblast-2 dry ice blasting unit. Very well maintained machine, electrical wiring and fittings have been upgraded, new dosing disc. Air prep unit alone costs $4500 new, this was designed specifically for dry ice blasting. Blasting machine and extra hoses retail for over $20,000.


Great contractor starting kit! I’m asking $13,500 (CAD) all inclusive, including tax.
Shipping is extra (from Calgary, Alberta.)
Ice Tech KG 30 Blasting Machine
Sold in 8 months, "thanks for everything"

  

IceTech KG 30

Professional Heavy Duty
50hrs on machine
Dimensions mm/inch:
Length: 580 / 22.8
Width: 550 / 21.6
Height: 800 / 31.4

Weight: kg: 85 / lbs: 187
Dry Ice Hopper Capacity: kg: 30 / lbs: 66
Dry Ice Consumption: kg/hr: 0-100 / lbs/hr: 0-220 infinitely adjustable
Supply Pressure: bar: min. 5 - max 16 psi: /min 72 - max 232
Blasting Pressure: bar: min. 2 - max 16/ psi: min 29 - max 232
Air Consumption: cfm: 25 - 388 /depending on nozzle combination
Connection: 1” claw
Power Consumption: 110/230 VAC 50-60 Hz 800 W
User-friendly control panel/ hour meter
Blast hose 32 ft w/1500’ roll of poly protective sleeve
IT2 box set with extras: 16” 90 degree extension #91205 / coupler
           #91003 / splitter screens #91434
Factory Protective Cover

Price $17,900.00 USD
32 DE-grease
#93 US Hwy 63 Baldwin, WI 54002

Delivery within 500 miles of us.

SULLAIR Rotary Screw Compressor

SULLAIR Rotary Screw Compressor
 
John Deere Engine 2003
Sullair 185H
Engine: 4.5L
Model: JD4045
Rated speed: 2200 rpm
Idle speed: 1700 rpm
Rated power: 78 Hp
Fuel capacity: 25 gallon
Block Heater

 
Rotary Screw 2003
Max operating: 150 psi
Delivery: 185 cfm
Electrical: 12 volt
Hours: 1628

Trailer
Wet weight: 2580 lbs
Axle rating: 3500 lbs
New spare
Pintle hitch/ with jack

Price $7,200.00 USD
Company: 32 DE-grease
#93 US Hwy 63 Baldwin, WI 54002

2007 Karcher IB 15/80
Sold in 6 months. "I had inquiries from all over the world. Your site works well."

Like new condition, stainless steel construction, pneumatic tires, locking casters


 

Only 24 working hours on meter

(Additional Pictures available)

Specs:

35 kg capcity of 3mm C02 pellets
Dry ice comsumption 30-100 kg per hour
Blasting presure 0.3 - 1.6 MPa (3-16 bar 42 - 232 psi)
Air flow rate 0.3 - 11 m3 (10.6 cfm - 406 cfm)
Air hose 1"
Power Supply 220-240v

Comes with:

- Inline air drier & oil remover
- Blasting gun
- 7m blasting hose
- 3 nozzles - Flat Jet
                   - Round Jet
                   - 10mm insert for Round Jet
- 2 Wrenches
- Grease for nozzle thread
- Nozzle case
- Ear Protection (ear muffs)

Contact:
JBL Services Inc
1358 Greenspring Rd.
RR#3 Campbellville, L0P 1B0
Ontario, Canada

$12,000 CDN

Aero 80-DX Dry Ice Blasting Machine

With After Cooler SOLD in 72 days

IMMEDIATELY AVAILABLE

NEW


4.7 hours

 

Contract Cancelled
We no longer have a need for this top of the line equipment and are prepared to sell at a discount.

Features

Variable pellet feed rate of 0-7 lbs/min (0-3.2 kg/min)
Tilt-out hopper with unused ice saving feature
360° radius mobility
All terrain, no-flat wheels
80 lb (36 kg) hopper

Specifications

Hopper size: 80 lbs (36 kg)
Blast pressure range: 30-140 PSI (2.9 - 9.7 bar)
Inlet air connector: 1" (2.5 cm) NPT
Feed rate: 0-7 lbs/min (0-3.2 kg/min)
Dimensions: 43" x 20" x 46" (109 x 52 x 118 cm)
Weight: 400 lbs (181 kg)
Hose and nozzle management devices

Options & Extras

After Cooler (400P)
Hoses
Nozzles
Accessories

$25,000.00
All Inclusive
FOB, Hingham, MA, USA

After Cooler can be sold separately

Hennigan Engineering
55 Industrial Park Road
Hingham, MA
U.S.A.

Commando 55 blaster
SOLD in 62 days

(additional pictures available)
 

I have a BRAND new Commando 55 blaster that comes with assorted nozzles, hose etc...READY to blast! It was part of a bonus package when I worked for the company.

I have attach a video link that shows all about the machine, even though I'm personally selling it, the company will still offer its 2 year warranty to whomever buys it.

http://nuiceage.com/videos/C55-IntroVideo.wmv

It's $26,000 new and I'd like to ask $15,900.
I will look at all reasonable offers.

Grand Rapids, MI
 

 

AeRO 75 DX Dry Ice Blasting Machine
SOLD in 170 days

 

Specifications

  • Fully isolated hopper (75 lb / 34 kg capacity)

  • Variable feed rate (up to 7 lbs / 3.2 kg per min)

  • Low pressure system (up to 140 psi / 9.7 bar)

  • Necessary compressed airflow volume depends on the nozzle being used - with most nozzles 50 to 150 cfm (1.4 to 4.3 m³/min) is required at a 80 psi (5.5 bar) operating pressure.

  • Weight - 295 lbs / 134 kg

  • Size (L X W x H): 34" x 20" x 40" (86.4 cm x 50.8 cm x 101.6 cm)

  • 100-140 VAC, 1 PH 50/60 Hz, 9 amps or 200-240 VAC, 1 PH 50/60 Hz, 4.3 amps

  • Hour meter

  • Hose and nozzle management devices

We bought this in new in 2007.   It has 141 hours on it and is in very good condition. 
We would like to sell it for $19,000.

Contact:
Inserts East
7045 Central Highway
Pennsauken, NJ  08109

New AeRO 40HP Dry Ice Blaster with After Cooler
and many extras
SOLD in 35 days

 

Equipment Includes:

Blast Unit, Aero 40 HP, 110 V, 2A01777
AFTER COOLER, 400P; 2M0023-G1
NOZZLE, 312V2, 5E0274 $1,980.00
HOSE, BLAST, 1 1/4 IN X 20 FT, ELECTRIC, RUBBER, AERO SERIES
HOSE, BLAST, 1 IN X 20 FT, ELECTRIC, RUBBER, AERO SERIES
NOZZLE, 523V4, 5E0257
APPLICATOR W LIGHT ATTACHMENT; 2E0425-G2
(2) FITTINGs, 1 1/4" JICM X 1 1/4" JICM; 20HTX-S
NOZZLE, 323S1; 5E0175
Static bond cable, 40', 2G1307, for rubber hoses
AIR SUPPLY HOSE, 1" X 25' (1 SWIVEL INCLUDED); 2N0199
HANDLE, 1" OD TUBES ADJ; 2E0209
Bonding Cable Shaft Collar for 1" blast hoses
HOSE, BLAST, 1 1/4 IN X 20 FT, ELECTRIC, RUBBER, AERO SERIES
Static bond cable, 40', 2G1307, for rubber hoses
(2)16HTX-S FITTING, COUPLING, 1 lN JICM, PLATED STEEL
3E0976 FITTING, NOZZLE BASE, 1 IN JICM X ALPHA NOZZLE, ALUMINUM, AERO
2E0385 NOZZLE, ROTARY UNION W/ 8 BOLT FITTING
2E0349-A NOZZLE, 307A45H1, BLUE, COATED STAINLESS STEEL, POLYMER BUMPER
5N0013 FITTING, REDUCER, 3/4IN JICM X 1 IN JICM, AERODYNAMIC, PLATED STEEL
(3) Extension tubes 1' jicf by 60' ALUMINUM AERO SERIES

25' Air Hoses and fittings
 

All Equipment new - only 4 hours on the meter. Paid over $37,000 -

All this for only $27,000
Danville, Illinois

Cold Jet AeRO 40 Dry Ice Blasting Machine
SOLD
in 72 days

   

Aero 40 with 4 nozzles

This machine is in brand new condition with only 24 hours on the hour meter.

The 2’ V Mern nozzle can fracture the pellets to different sizes so that you can blast with full size
 or fracture them down to snow size for delicate cleaning. It is like having 3 nozzles in one.
Also Nozzle MS-136 with 30’ extension known as the back scratcher for reaching tight spaces.

2-20’ blast hoses.

Asking price $18,500.00.

Many additional pictures available.

Miami FL, USA

Cold Jet AeRO 40 Dry Ice Blaster & Extra Mern Nozzle SOLD in 44 days

     

Brand New Dry Ice Blaster & Equipment for sale
Cold Jet Aero 40
Hours Used: 1 (one) hour
Still under warranty! Everything is in perfect condition!

The machine and equipment was purchased in late April 2011. We paid over $25,000 in total for the machine and equipment.
Husbands Company is too busy to proceed with this additional business venture.
Will sell for $16,000 Canadian.
Still have original shipping crate. This is a steal of a deal.
Supplier has offered to purchase back machine at 18,000 but is waiting on a buyer for this specific model - but need to make room in the shop.
Our loss is your gain! For those in the United States - take advantage of the stronger American dollar!!

Unique Features Include:
SureFlow System
Patented isolated hopper design
Advanced space-age hopper insulation (dramatically slows ice sublimation)
Sealed hopper/lid design
Patented, industry leading feeder design
Trigger-activated hopper agitation
360° radius mobility
All terrain, no-flat wheels
Hose and nozzle management devices
12-month warranty


Equipment Also Included:
1 (one) – Applicator Gun
1 (one) – 25 ft of air hose comes with hose wrap
1 (one) – 50 feet of Blast hose comes with hose carrier
1 (one) – 1 Ό - 1 Ό” (20HTX-S) JICM Fitting
1 (one) – 1 - 1 Ό” (5N0003) JICM Fitting
1 (one) – 1” Blast hose comes with hose carrier
1 (one) – (2E0289) Nozzle Handle
1 (one) – Static Ground
1 (one) – 1” Bonding Collar (3N008)
1 (one) – 1 Ό” Bonding Collar (3N0089)
1 (one) – Wheel Chocks
1 (one) – Mern Nozzle
100 cfm. Blast swath 2” x 3”
(Paid $600 plus taxes for this nozzle alone)
1 (one) – Nozzle
100 cfm. Blast swath 1 x 23”

More pictures are available. Serious Inquires Only Please.

Blaster is located in:
Fort St. John, British Columbia, Canada V1J 4M6
Will sell for $16,000 Canadian

Cold Jet AeRO 40 Dry Ice Blasting Machine With After Cooler SOLD in 60 days.

Cold Jet After Cooler   Cold Jet Areo 40    Cold Jet Applicater with light
          After Cooler 400P                              Aero 40                 Applicator with light attachment

Aero 40 used one time, has 2 hours on the hour meter.
This machine is in brand new condition.

The applicator with the light attachment.

The 2' V MERN nozzle can fracture the pellets to different sizes
so that you can blast with full size pellets or fracture them down to snow size for delicate cleaning.
 It is like having 3 nozzles in one.

Also nozzle MS-136 with 30' extension known as the back scratcher for reaching tight spaces.

2 - 20' blast hoses.

After cooler 400P for removing moisture from your air supply to keep your gun from freezing up
 eliminating frustrating down time. It is a must have for any humid environment.

Asking price $19,750.00. I am willing to split shipping costs.

Cold Jet Aero C100 Dry Ice Blasting Machine 3 SOLD in less than 4 months

The Aero C100 dry ice blasting system includes:
• One length of 1" (2.5 cm) Urebrade blast hose (12 meters)
• One length of air hose (7 meters)
• One length of air hose (20 meters)
• One Regulator kit
• One light weight blastpistol
• One nozzle 523 SF
Unique Features:
• SureFlow System
• Patented isolated hopper design
• Advanced space-age hopper insulation (dramatically slows ice sublimation)
• Sealed hopper/lid design
• Patented, industry leading feeder design
• Automated hopper agitation
• Impressively small footprint with 0° radius mobility
• Heavy duty motor
• All terrain, no-flat wheels
Specifications
• Hopper size: 100 lbs (45.5 kg)
• Feed rate: 1-7 lbs/min (0.5-3.2 kg/min)
• Dimensions: 31" x 15" x 45" (78.7 x 38.1 x 114.3 cm)
• Weight: 250 lbs (113.6 kg)
• Air consumption: 50-215 CFM (1.4-6.1 m³/min) at 80 PSI (5.5 bar)
• Blast pressure: 20-140 PSI (1.4-9.7 bar)
• Min Blast pressure: 20 PSI (1.4 bar) with optional pressure regulator
• Inlet air temperature: 175 F (79 C) Maximum
• Inlet air connector: 1" (2.5 cm) NPT

Cold Jet Areo C100

Catalog

The Aero C100 Pneumatic is the most powerful and efficient dry ice blasting machine ever. With cleaning performance that's twice as fast as other pneumatics, and a pulse-free stream that cleans uniformly on every pass. This machine also employs Cold Jet's patented SureFlow System design which allows you to use a full 100lb load without worrying about clogging. Couple that with automated hopper agitation and the ability to double your hose length up to 100 feet in total.

3 Units available(in Belgium) 3 SOLD in less than 4 months

Serial number: 241 Serial number: 243 Serial number: 244
• 1st use : February 2009
• Total working hours: 516
• 1st use : February 2009
 • Total working hours: 613
• 1st use : February 2009
 • Total working hours: 515

DSTA Durable Service Technical Assistance nv
Adolphe Lacomblιlaan 71/5 BE-1030 Brussel

A buyer can buy them separately or all 3, for 14.000 € a piece.

Located at: Gentsestweenweg 141a
2800 Mechelen, Belgium

AeRO 80 Dry Ice Blasting Machine

SOLD! IN 14 DAYS

Cold Jet Aero 80

Address: 127 Raymond Drive, Indiana, Pa 15701

1 hour operation on unit, machine did not fit our application needs.
 Current factory warranty expires 7/27/11 (willing to split cost for 1 full year of extended warranty)

Asking Price $21,500.00

Specifications
  • Hopper size: 80 lbs (36.4 kg)
  • Feed rate: 0-7 lbs/min (0-3.2 kg/min)
  • Dimensions: 43" x 20" x 46" (109.2 x 50.8 x 116.8 cm)
  • Weight: 400 lbs (181.8 kg)
  • Air consumption: 50-215 CFM (1.4-6.1 m³/min) at 80 PSI (5.5 bar)
  • Blast pressure: 20-140 PSI (1.4-9.7 bar)
  • Min Blast pressure: 20 PSI (1.4 bar) with optional pressure regulator
  • Inlet air connector: 1" (2.5 cm) NPT
  •  

    Cold Jet Aero 40 Dry Ice Blasting Machine

    SOLD! IN 40 DAYS

    Cold Jet Areo 40          
     

    I have an Aero 40 that I want to sell.

    $18,750

    • time used - 40 hours
    • 1 - 20' length of Urebrade blast hose
    • 1 - 323S1 - 1' Nozzle
    • 1 - 25' Section of air supply hose
    • Static bonding cable w/shaft collar
    • Also comes with operators manual

    Low pressure operation - perfect for pre-weld cleaning, printing presses, mold remediation,
    disaster recovery, and other areas where the substrate needs to be carefully preserved.

    Midwest Dry Ice Blasting, Inc.
    26148 Newton Circle
    , Elko, MN 55020

    Cold Jet SDI-5 Dry Ice Blasting Machine

    SOLD!
    IN
    85 DAYS

    We have closed our business and are selling off our equipment. We used this unit to clean printing machines, from the hard backed on inks down to the electronic circuit boards. The nice thing about the SDI-5 is that is shaves the blocks with special cutters producing a fine power (depending on settings) to clean the electronic boards and wires, thereby insuring no damage.

    Priced to sell $8,950.00

    Specifications:
    Year: about 2000
    Dimensions: 24 and 1/2" x 37" x 45" (WxLxH)
    Net Weight: Approximately 450 lbs.*
    Supply Pressure Range: 75-300 psig
    Blast Pressure Range: 40-250 psig **
    Storage Capacity: 120 lbs. of dry ice
    Ice Consumption: 1-6 lbs/min with 3:1 turndown

    West Palm Beach, Florida 33413
    Sales@activeprintech.com

    Shipping only $265.00 within the lower 48 States, USA

    Cold Jet SDI-5


    SOLD! IN 14 DAYS

    Model: SDI-5 2 Hose

    Bethlehem, PA
    USA

    Never Used!
    Everything included:
    Hoses, nozzles, instructions, cloth cover - even on its original skid.
    $13,000.00

    Shipping only $240.00 within the lower 48 States, USA

    This large dual-hose low pressure, pneumatic blasting system utilizes dry ice block, pellets or nuggets assuring flexibility and versatility in providing a wide range of blasting pressures: 40 to 250 psi (2.8 to 17.2 bar).

    AeRO 75 Dry Ice Blasting Machine

    AeRO75
    SOLD!
    IN 52 DAYS

    Cold Jet AeRO 75

    Asking price is $14,500.00

    Dry Ice machine for sale in Garden City, Kansas. Unit only has 50 hours use.  Hoses and nozzle included.  Motivated seller.
    For more information on the unit please contact Brent Colvin at 620-272-3136.  More pictures available upon request. We will pay for delivery within the continental United States.

    This single-hose low pressure, electric dry ice blast cleaning system that utilizes dry ice pellets in a patented aerodynamic rotor which assure high reliability and smooth pulse-free dry ice blast flow at pressures up to 140 psi (9.7 bar).

    Unique Features:

    • Variable dry ice pellet feed rate of up to 7lbs (3.2 kg) per minute

    • Patented isolated hopper supports dry ice pellet flow while reducing vibration and noise

    • Hour meter that will aid in tracking maintenance intervals, job or department costing

    • Hopper lid has a unique sliding screen design incorporating a safety interlock switch that disables machine when open

    • 75 lb (34 kg) hopper

    Cold Jet SDI-5


    SOLD! IN 51 DAYS

    Model: SDI-5 2 Hose

    From: Wisconsin Dry Ice Blasting LLC
    Manitowoc, WI
    USA

    Excellent Condition
    Clean Ready to go
    $10,500.00
    Will pay shipping within USA
     

    This large dual-hose low pressure, pneumatic blasting system utilizes dry ice block, pellets or nuggets
    assuring flexibility and versatility in providing a wide range of blasting pressures: 40 to 250 psi (2.8 to 17.2 bar).

     AeRO 75 Dry Ice Blasting Machine

    Cold Jet Aero-75 SOLD in 160 Days

     

    (1)   EACH AERO 75-DX BLASTING UNIT, High Pressure, 110V, HP, 50mm; 51H2-J
    (3 EACH -60 FEET) 1" UREBRADE BLAST HOSE ASSY, 240" Lg 5PIN CC;2N0178
    (1)   EACH 523 SF NOZZLE;5E0175 (3 inch wide nozzle)
    (1)   EACH Cold Jet After Cooler 400P;2M0023-G1
    (1)   EACH 807 SL Nozzle;5E0141( 2 inch industrial nozzle) short nozzle
    (1)   EACH  523M1  (1 inch high flow, high pressure nozzle).

    I will order new hose jackets and really get this thing in showroom condition for a new buyer.
    I would like $24,800.

    Springfield, Missouri

     

    AeRO 75 Dry Ice Blasting Machine
    Removed from market - decided to keep using it!

    Specifications

    • Fully isolated hopper (75 lb / 34 kg capacity)

    • Variable feed rate (up to 7 lbs / 3.2 kg per min)

    • Low pressure system (up to 140 psi / 9.7 bar)

    • Necessary compressed airflow volume depends on the nozzle being used - with most nozzles 50 to 150 cfm (1.4 to 4.3 m³/min) is required at a 80 psi (5.5 bar) operating pressure.

    • Weight - 295 lbs / 134 kg

    • Size (L X W x H): 34" x 20" x 40" (86.4 cm x 50.8 cm x 101.6 cm)

    • 100-140 VAC, 1 PH 50/60 Hz, 9 amps or 200-240 VAC, 1 PH 50/60 Hz, 4.3 amps

    • Hour meter

    • Five 2" Hose and two smaller hoses four nozzles and two guns

    • 200 foot air hose

    This machine has worked well for me.

    No longer available

    Brian J Driskill
    Louisiana

    Recently SOLD Dry Ice Machines
    The three pellet machines we have listed on your web site in Fort Worth Texas. have sold.
    Your site worked well in getting them sold.

    Wittemann Dry Ice Extruder
    SOLD
    to a customer who contacted us after 4 months

    Model Number: DE 79RB-100 complete with 71/2 HP ODP motor, full voltage starter, co2 bent hose connection and hydraulic oil.

    The unit is designed to produce high density 3/8” diameter Dry Ice pellets at a rate between 100 and 120 lbs. per hour depending on certain operating parameters such as storage pressure and quality of liquid CO2.

    Complete owner’s manual and blueprints.

    $12,000 USD

    Please contact: Murray Peters
    Sacramento, CA
     

    Dry Ice Pellet Machine from Holmes Equipment #1
    SOLD in less than 6 months

    Unit 1: 3,000 pounds per hour 5/8 inch head.
    Ser #
    available upon request Manufactured 11-96

    $10,000 USD

    Fort Worth, TX, USA
     

    Dry Ice Pellet Machine from Holmes Equipment #2 
    SOLD in less than 6 months

    Unit 2: 3,000 pounds per hour 5/8 inch head.
    Ser # available upon request. Manufactured
    11-96

    $10,000 USD

    Fort Worth, TX, USA
     

    LD Nugget System Model # HPE-69-8-2
    from Liquid Carbonic Corp.
     
    SOLD
    in less than 6 months

    Unit 3: 3,000 pounds per hour 5/8 inch head.
    Ser # available upon request. Manufactured 1969

    $10,000 USD

    Fort Worth, TX, USA
     

    Baldwin Dry Ice Press with vapor recovery system for sale
    SOLD in 10 months

    Includes one Baldwin Dry Ice Press with hydraulic system, PLC control, conveyors and saws.  Also included is one two stage Cooper 150hp high pressure vapor recovery system with all heat exchangers, chiller and recovery vessel.  Unit was in service through April 2010. Equipment For Sale as is, you remove from Miami FL. site . . .   see more pictures.

    Interested Buyers call Bob Brown
     

    Cold Jet PPAH-1500 Pellet Ice Maker
    SOLD in 4 months

    Cold Jet PPAH-1500 Pellet Ice Maker

    Cold Jet PPAH -1500 Ser#CCICDP065 480V 45A 3 Phase 50/60 Cycle

    Automatic pellet production capability of up to 1200 lbs (545.5) of dry ice per hour. Choice of 3 mm high-density pellets, and 6 mm, 9 mm, 13 mm, 16 mm or 19 mm nuggets.
    This machine has little run time with hours reading only 10,570. It has been disconnected since 2009.

    This machine is priced to sell quick at $35,000.00
    Reduced to $30,000

    All offers will be considered. Times are tight and machine must go. New machine will cost around $90,000.00 Oil sample has been taken and tested with good results. (Available upon request)
     

     

     

    There are many more buyers from all over the world looking for dry ice equipment and dry ice blast cleaning equipment.

     

    Price your equipment right and sell it here!

     

    To convert currency please use:  Personal Currency Assistant

    Add your used equipment for sale here:

    Marketing

     

    This informative site is supported by the manufacturers and sellers of dry ice supplies and equipment.
    Thank you for supporting them.


     

    Praxair, Inc.

    World Headquarters
    39 Old Ridgebury Road
    Danbury, CT 06810-5113
    Tel.: 203-837-2000
    Fax: 203-837-2532

    Website : http://www.praxair.com/


     

    <
     

    Serving Michigan, Ohio, and Indiana.

    Detroit, Michigan
    734 765 9685
    Web Site: http://www.mes-detroit.com/
    John Perozek
    john@mes-detroit.com
     


     

    Wickens Dry Ice Blasting
     

    Wickens Dry Ice Blasting Inc.
    8199 Esquesing Line
    Milton, Ontario, Canada
    L9T6E7

    Phone (905) 875-2182

    E-mail: info@wickens.com.

    Web site: http://www.wickensdryiceblasting.com

    Wickens is a Full service dry ice company offering contract cleaning services at your location or ours, equipment sales and complete rental packages.

      Currency conversion available:


    This site is supported by the many manufacturers and sellers of dry ice supplies and equipment. Thank you for supporting them.

     

     

    Please add your dry ice equipment and products to this list?
    Marketing

     

    Or call Ken or Ellen Ackerman @ +1 949 347-1500

     

    If you have questions you can send e-mail to Ken Ackerman 

    ©2003-2014 dryiceWeb.com. All Rights Reserved.

    Last Revised: 08/14/14